What is the conveying capacity of pneumatic conveying system related to?

氣力輸送系統的輸送能力與輸送管道的直徑有關，不同行業、不同輸送顆粒物料的輸送管道尺寸也不同。輸送能力越大，管徑越大，但管道連接也非常重要。連接不當容易導致漏風、損壞、堵塞等故障。在布置氣力輸送系統的管道時有哪些注意事項？

The conveying capacity of pneumatic conveying system is related to the diameter of conveying pipeline, and the size of conveying pipeline for different industries and different granular materials is also different. The larger the conveying capacity, the larger the pipe diameter, but the pipe connection is also very important. Improper connection can easily lead to air leakage, damage, blockage and other faults. What are the precautions when arranging the pipeline of pneumatic conveying system?

安裝輸送管道時，應注意管道與設備的緊密連接，活動接頭和密封墊片不得移位。氣力輸送系統管道中，水平輸送管路平面度誤差值不超過3‰，總長不超過30mm；垂直輸送管路平面度誤差值不超過2‰，總長不超過20mm。當我們使用無縫管或焊管制作物料輸送管時，我們可以使用法蘭、卡箍連接等方法。這種連接方法稱為活接頭方法。輸送管道的接頭應盡量保持同軸，不得錯開，否則會增加阻力降，嚴重時會導致接口處原材料沉積和堵塞對于提升氣力輸送系統的管道連接，對易堵塞的管線和彎頭可合理增加推力器，提高驅動力；改造后粉體氣力輸送系統設備潛力超過原設計指標，僅對管道進行了改進，即合理提高了管道及管件的使用壽命，為了減少維護和保護的工作量。

When installing the transmission pipeline, pay attention to the close connection between the pipeline and the equipment, and the movable joint and sealing gasket shall not be displaced. In the pipeline of pneumatic conveying system, the flatness error of horizontal conveying pipeline shall not exceed 3 ‰ and the total length shall not exceed 30mm; The flatness error of vertical conveying pipeline shall not exceed 2 ‰ and the total length shall not exceed 20mm. When we use seamless pipe or welded pipe to make material conveying pipe, we can use flange, clamp connection and other methods. This connection method is called the union method. The joints of the conveying pipeline shall be kept coaxial as far as possible and shall not be staggered, otherwise it will increase the resistance drop, and in serious cases, it will lead to the deposition and blockage of raw materials at the interface. For the pipeline connection of the lifting pneumatic conveying system, the thruster can be reasonably increased for the easily blocked pipeline and elbow to improve the driving force; After the transformation, the equipment potential of the powder pneumatic conveying system exceeds the original design index, and only the pipeline is improved, that is, the service life of the pipeline and pipe fittings is reasonably increased, in order to reduce the workload of maintenance and protection.

以水平或垂直方式運行的氣流輸送

Airflow conveying in horizontal or vertical mode

在日常的加工過程中，工廠會使用各種類型的機器進行日常的加工。同時在完成日常的加工后，工廠會通過氣流輸送的方式進行產品的運輸工作。并且由于其擁有特殊的性能，使得其能在日常的加工過程中發揮出應有的水平。

In the daily processing process, the factory will use various types of machines for daily processing. At the same time, after completing the daily processing, the factory will transport the products by air transportation. And because of its special performance, it can play its due level in the daily processing process.

相關的通道會將其輸送到系統的入口處，同時操作工會啟動機器的開啟按鈕。同時流動的空氣會通過推力將其輸送到材料上，以使其能通過輸送線。并且在日常的輸送過程中會出現壓力差等現象，所以會使用輸送鼓風機和壓縮機進行日常的工作。

The relevant channel will transport it to the entrance of the system and operate the start button of the union to start the machine at the same time. At the same time, the flowing air will be transported to the material by thrust so that it can pass through the conveying line. In addition, there will be pressure difference and other phenomena in the daily conveying process, so the conveying blower and compressor will be used for daily work.

同時在日常的加工過程中，氣流輸送可以以水平或垂直的方式運行很長的距離。并且緊湊的管道傳輸線設計使其易于在當前使用的設備周圍布置氣力輸送系統，使其能適用于日常的大多數輸送系統中。

At the same time, in the daily processing process, air conveying can run a long distance horizontally or vertically. Moreover, the compact pipeline transmission line design makes it easy to arrange the pneumatic conveying system around the currently used equipment, so that it can be applied to most daily conveying systems.

以上就是為大家介紹的有關江蘇氣力輸送設備的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://m.rohs-international.com/

The above is the introduction of Jiangsu pneumatic conveying equipment. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://m.rohs-international.com/